SIL-PAD
SIL-PAD 1100ST (Soft Tack)
Features & Benefits
- Inherent tack on both sides for exceptional thermal performance and easy placement
- Re-positionable for higher utilization, ease of use and assembly error reduction
- Lined on both sides for ease of handling prior to placement in high volume assemblies
- Exhibits exceptional thermal performance even at a low mounting pressure
- Fiberglass reinforced
- Value alternative to Sil-Pad 1500ST
Properties
| Properties | Imperial Value | Metric Value | Test Method |
|---|---|---|---|
| Reinforcement Carrier | Fiberglass | Fiberglass | *** |
| Color | Yellow | Yellow | Visual |
| Inherent Surface Tack | 2 | 2 | *** |
| Hardness (Bulk Rubber) (Shore 00) (1) | 85 | 85 | ASTM D2240 |
| Typical Use Temp (°F) / (°C) | -76 to 356 | -60 to 180 | *** |
| Thickness (inch) / (mm) | 0.012 | 0.305 | ASTM D374 |
| Breaking Strength (lbs/inch) / (kN/m) | 2.6 | 0.5 | ASTM D1458 |
| Elongation (%45° to Warp and Fill) | 16 | 16 | ASTM D412 |
| Tensile Strength (psi) / (MPa) | 220 | 1.5 | ASTM D412 |
| Electrical | Imperial Value | Metric Value | Test Method |
|---|---|---|---|
| Dielectric Breakdown Voltage (Vac) | 5000 | 5000 | ASTM D149 |
| Dielectric Constant (1000 Hz) | 5.0 | 5.0 | ASTM D150 |
| Volume Resistivity (Ohm-meter) | 10^10 | 10^10 | ASTM D257 |
| Flame Rating | V-O | V-O | U.L. 94 |
| Thermal | Imperial Value | Metric Value | Test Method |
|---|---|---|---|
| Thermal Conductivity (W/m-K) | 1.1 | 1.1 | ASTM D5470 |
| Pressure (psi) | 10 | 25 | 50 | 100 | 200 |
|---|---|---|---|---|---|
| TO-220 Thermal Performance (ºC/W) | 2.72 | 2.71 | 2.68 | 2.62 | 2.23 |
| Thermal Impedance (°C-in2/W) | 0.75 | 0.71 | 0.66 |