SIL-PAD

Q-Pad II

Features & Benefits

  •  Thermal impedance: 0.22°C-in2/W (@50 psi)
  •  Maximum heat transfer
  •  Aluminum foil coated both sides
  •  Designed to replace thermal grease

Properties

Typical properties of Q-Pad II
Properties Imperial Value Metric Value Test Method
Reinforcement Carrier Aluminum Aluminum ***
Color Black Black Visual
Hardness (Bulk Rubber) (Shore 00) 93 93 ASTM D2240
Typical Use Temp (°F) / (°C) -76 to 356 -60 to 180 ***
Thickness (inch) / (mm) 0.006 0.152 ASTM D374
Typical properties of Q-Pad II
Electrical Imperial Value Metric Value Test Method
Dielectric Breakdown Voltage (Vac) Non-Insulating Non-Insulating ASTM D149
Dielectric Constant (1000 Hz) NA NA ASTM D150
Volume Resistivity (Ohm-meter) 10^2 10^2 ASTM D257
Flame Rating V-O V-O U.L. 94
Typical properties of Q-Pad II
Thermal Imperial Value Metric Value Test Method
Thermal Conductivity (W/m-K) 2.5 2.5 ASTM D5470
Typical properties of Q-Pad II
Pressure (psi) 10 25 50 100 200
TO-220 Thermal Performance (ºC/W) 2.44 1.73 1.23 1.05 0.92
Thermal Impedance (°C-in2/W) 0.52 0.30 0.22