GAP FILLER
GAP FILLER 1000SR
Features & Benefits
- Thermal conductivity: 1.0 W/m-K
- Excellent slump resistance (stays in place)
- Ultra-conforming, with excellent wet-out for low stress interface applications
- 100% Solids – no cure by-products
- Excellent low and high temperature mechanical and chemical stability
Properties
| Properties | Imperial Value | Metric Value | Test Method |
|---|---|---|---|
| Density (Bulk Rubber) (g/cc) | 2.0 | 2.0 | ASTM D792 |
| Color / Part A | Violet | Violet | Visual |
| Color / Part B | White | White | Visual |
| Mix Ratio | 1:1 | 1:1 | *** |
| Shelf Life @ 25ºC (months) | 6 | 6 | *** |
| Viscosity, High Shear (Pa-s) (1) | 20 | 20 | ASTM D5099 |
| Electrical | Imperial Value | Metric Value | Test Method |
|---|---|---|---|
| Dielectric Constant (1000 Hz) | 5.1 | 5.1 | ASTM D150 |
| Volume Resistivity (Ohm-meter) | 10^11 | 10^11 | ASTM D257 |
| Flame Rating | V-O | V-O | U.L. 94 |
| Dielectric Strength (V/mil)/(V/mm) | 500 | 20,000 | ASTM D149 |
| Thermal | Imperial Value | Metric Value | Test Method |
|---|---|---|---|
| Thermal Conductivity (W/m-K) | 1.0 | 1.0 | ASTM D5470 |
| Property as Cured | Imperial Value | Metric Value | Test Method |
|---|---|---|---|
| Color | Violet | Violet | Visual |
| Hardness (Shore A) (2) | 75 | 75 | ASTM D2240 |
| Heat Capacity (J/g-K) | 1.0 | 1.0 | ASTM E1269 |
| Continuous Use Temp (°F) / (°C) | -76 to 347 | -60 to 175 | *** |
| Cure Schedule | |||
|---|---|---|---|
| Pot Life @ 25ºC (min) (3) | 60 | 60 | *** |
| Cure @ 25ºC (hrs) (4) | 20 | 20 | *** |
| Cure @ 100ºC (min) (4) | 10 | 10 | *** |