GAP FILLER

GAP FILLER 1500

Features & Benefits

  •  Thermal conductivity: 1.8 W/mK
  •  Optimized shear thinning characteristics for ease of dispensing
  •  Excellent slump resistance (stays in place)
  •  Ultra-conforming with excellent wet-out for low stress interface applications
  •  100% solids – no cure by-products
  •  Excellent low and high temperature mechanical and chemical stability

Properties

Typical properties of GAP FILLER 1500 (Two-Part)
Properties Imperial Value Metric Value Test Method
Density (Bulk Rubber) (g/cc) 2.7 2.7 ASTM D792
Color / Part A Yellow Yellow Visual
Color / Part B White White Visual
Viscosity as Mixed (cps) (1) 250,000 250,000 ASTM D2196
Mix Ratio 1:1 1:1 ***
Shelf Life @ 25ºC (months) 6 6 ***
Typical properties of GAP FILLER 1500 (Two-Part)
Electrical Imperial Value Metric Value Test Method
Dielectric Constant (1000 Hz) 6.0 6.0 ASTM D150
Volume Resistivity (Ohm-meter) 10^10 10^10 ASTM D257
Flame Rating V-O V-O U.L. 94
Dielectric Strength (V/mil)/(V/mm) 400 16,000 ASTM D149
Typical properties of GAP FILLER 1500 (Two-Part)
Thermal Imperial Value Metric Value Test Method
Thermal Conductivity (W/m-K) 1.8 1.8 ASTM
Typical properties of GAP FILLER 1500 (Two-Part)
Property as Cured Imperial Value Metric Value Test Method
Color Yellow Yellow Visual
Hardness (Shore A) (2) 50 50 ASTM D2240
Heat Capacity (J/g-K) 1.0 1.0 ASTM E1269
Continuous Use Temp (°F) / (°C) -76 to 347 -60 to 175 ***
Typical properties of GAP FILLER 1500 (Two-Part)
Cure Schedule
Pot Life @ 25ºC (min) (3) 60 min 480 min (8hr) ***
Cure @ 25ºC (hrs) (4) 5 hours 3 days ***
Cure @ 100ºC (min) (4) 10 min 30 min ***